Technical Specifications of GE WES13-3 2508-21001

General Parameters

• Model: WES13-3 2508-21001
• Manufacturer: General Electric (GE)
• Application: Industrial control or power system automation (typically integrated into protection, monitoring, or control loops in electrical networks)

Electrical Ratings

• Operating Voltage: [Specify range, e.g., 110–240V AC/DC or 24–48V DC] (refer to official documentation for exact values)
• Power Consumption: [Specify, e.g., ≤ 15W] under nominal load
• Input Signal Range:
  • Analog Inputs: [Specify, e.g., 0–10V DC, 4–20mA] (configurable for voltage/current measurements)
  • Digital Inputs: [Specify, e.g., Dry contact (NO/NC) or 24V DC wetting]
• Output Signal:
  • Relay Outputs: [Specify, e.g., 1x Form C (SPDT), rated for 5A @ 250V AC / 30V DC]
  • Analog Outputs (if applicable): [Specify, e.g., 4–20mA, accuracy ±0.1% FS]

Environmental Ratings

• Operating Temperature: [Specify range, e.g., -20°C to +70°C]
• Storage Temperature: [Specify range, e.g., -40°C to +85°C]
• Relative Humidity: [Specify, e.g., 5%–95% RH, non-condensing]
• Vibration Resistance: [Specify, e.g., 10–500Hz, 10g peak (IEC 60068-2-6)]
• Shock Resistance: [Specify, e.g., 30g peak (11ms duration, IEC 60068-2-27)]
•  

Performance

• Measurement Accuracy: [Specify, e.g., ±0.2% of full scale for voltage/current]
• Response Time: [Specify, e.g., < 10ms for digital inputs; < 50ms for analog processing]
• Insulation Resistance: [Specify, e.g., ≥ 100MΩ @ 500V DC (input/output to ground)]
• Dielectric Strength: [Specify, e.g., 2.5kV AC for 1 minute (input/output to ground)]

Physical & Interface

• Dimensions: [Specify, e.g., 120mm (L) × 80mm (W) × 60mm (H)]
• Mounting: [Specify, e.g., DIN rail mounting (35mm) or panel mount]
• Weight: [Specify, e.g., Approx. 250g]
• Communication Interface (if equipped): [Specify, e.g., RS-485 (Modbus RTU) or Ethernet]
•  

interface
*Output method: rear output
*Fast Ethernet: 3 slots, each slot supports 8 ports, with optional optical and electrical options
*Gigabit Ethernet: Provides 4 1000Base SFP slots
*CONSOLE port: RS232 (RJ45)
*Alarm port: 5.08mm spacing 3-pin Phoenix wiring terminal, 250VAC/220VDC 2 A
cable
*Twisted pair cable: 100m
*Multimode fiber: 1310nm, 2km (100Mbps); 1310nm, 500m (gigabit)
*Single mode fiber: 1310nm, 0-40km; 1550nm, 0-80km
source
*Input voltage: 110-220VDC/VAC, redundant input
*Connection terminal: 5.08mm spacing 5-pin Phoenix wiring terminal
*Power:<40W
mechanical properties
*Case: Aluminum model with fanless design
*Protection level: IP30
*Installation method: 19 inch 1U rack type
*Shell size: 440 mm * 44.5 mm * 370 mm (W * H * D), as shown in the attached image
*Impact, vibration, and drop: meet the requirements of IEC61850-3 5.5 CM level
*Weight: approximately 4.3kg

*10 Mbps forwarding speed: 14881pps
*100Mbps forwarding speed: 148810pps
*Transmission method: storage and forwarding
*System exchange bandwidth: 1.6Gbps
*Cache size: 1Mbits
*MAC address table: 2K