• PCD230  3BHE022291R0101 ABB Processor Module
  • PCD230  3BHE022291R0101 ABB Processor Module
  • PCD230  3BHE022291R0101 ABB Processor Module
  • PCD230  3BHE022291R0101 ABB Processor Module

PCD230 3BHE022291R0101 ABB Processor Module

PCD230A is core CPU control module for ABB UNITROL6000 generator excitation system, built with PowerPC high-performance processor, supports 1:1 hot redundant configuration for uninterrupted system switching upon single module failure. It processes generator voltage/current closed-loop regulation, field excitation logic control and fault diagnosis, widely installed in thermal power, hydropower and gas turbine generator sets, compatible with multi-type fieldbus and upper DCS monitoring platform. 
$267.00
  • PCD230  3BHE022291R0101 ABB Processor Module
  • PCD230  3BHE022291R0101 ABB Processor Module
  • Description

  • Here's how it works

  • SPECIFICATION

PCD230 / 3BHE022291R0101 Basic Info
Brand: ABB
Model: PCD230A
Order PN: 3BHE022291R0101
Product Name: UNITROL6000 Excitation Control Processor Module
Origin: Sweden
HS Code: 85389091
Dimension(W×H×D):40mm×200mm×150mm
Net Weight:0.60kg; Packing gross weight≈0.88kg

Operating Temp:0℃~+60℃; Storage Temp:-40℃~+85℃; Humidity 5%~95% non-condensing; Front IP20 protection
Input & Output Spec
Power Input
Rated DC24V input (allowable range DC20~32VDC), max power consumption 13W, dual redundant power terminal available
Signal Input
1. Analog input: Multi-channel PT/CT transformer sampling input for generator stator voltage & rotor current collection
2. Digital DI input: Dry contact interlock input for breaker status, auxiliary protection signal
3. Backplane bus input: Internal high-speed parallel bus from rack backplane
Signal Output
1. Field control analog output: 0~10V/4~20mA regulating signal for excitation thyristor drive
2. Communication output: 2×10/100Mbps Ethernet + Modbus RTU serial port for upper system data upload
3. Fault relay output: 1SPST dry contact(250VAC/3A) for remote system fault alarm
interface
*Output method: rear output
*Fast Ethernet: 3 slots, each slot supports 8 ports, with optional optical and electrical options
*Gigabit Ethernet: Provides 4 1000Base SFP slots
*CONSOLE port: RS232 (RJ45)
*Alarm port: 5.08mm spacing 3-pin Phoenix wiring terminal, 250VAC/220VDC 2 A
cable
*Twisted pair cable: 100m
*Multimode fiber: 1310nm, 2km (100Mbps); 1310nm, 500m (gigabit)
*Single mode fiber: 1310nm, 0-40km; 1550nm, 0-80km
source
*Input voltage: 110-220VDC/VAC, redundant input
*Connection terminal: 5.08mm spacing 5-pin Phoenix wiring terminal
*Power:<40W
mechanical properties
*Case: Aluminum model with fanless design
*Protection level: IP30
*Installation method: 19 inch 1U rack type
*Shell size: 440 mm * 44.5 mm * 370 mm (W * H * D), as shown in the attached image
*Impact, vibration, and drop: meet the requirements of IEC61850-3 5.5 CM level
*Weight: approximately 4.3kg
*10 Mbps forwarding speed: 14881pps
*100Mbps forwarding speed: 148810pps
*Transmission method: storage and forwarding
*System exchange bandwidth: 1.6Gbps
*Cache size: 1Mbits
*MAC address table: 2K