Eaton MP-3010 66D2205G01 Motor Protection Relay

Eaton MP-3010 66D2205G01 Product Introduction & Technical Parameters
Brand: Eaton 
Model: MP-3010, P/N 66D2205G01 
Product Description: The Eaton MP-3010 66D2205G01 is a microprocessor‑based three‑phase motor protection relay from the MP‑3000 series. It delivers comprehensive, programmable motor protection and condition monitoring for industrial motors, pumps, fans, compressors, and other rotating equipment, ensuring safe and reliable operation in harsh industrial environments. 
Weight: Approx. 2.61 kg (5.75 lbs) 
Dimensions: 171 mm × 260 mm × 111 mm (6.72 in × 10.25 in × 4.39 in) 
Country of Origin: USA 
HS Code: 8536909000 
Operating Temperature: -20°C to +50°C (-4°F to +122°F) 
Input: 120/240 VAC, 50/60 Hz; 2 programmable discrete inputs; 5A nominal phase current input 
Output: 4 programmable Form C relay outputs; 1 analog output; RS‑232 communication port 

Key Features:
Alphanumeric LED display for clear status and diagnostics
Programmable protection functions including overload, phase loss, phase imbalance, earth fault, and RTD temperature monitoring
Built‑in self‑test and fault diagnostics
Fixed case mounting for robust installation
UL, cUL, CSA certified for industrial use
Supports remote communication and configuration
Wide voltage input range for global application
Rugged construction for continuous duty in industrial environments

interface
*Output method: rear output
*Fast Ethernet: 3 slots, each slot supports 8 ports, with optional optical and electrical options
*Gigabit Ethernet: Provides 4 1000Base SFP slots
*CONSOLE port: RS232 (RJ45)
*Alarm port: 5.08mm spacing 3-pin Phoenix wiring terminal, 250VAC/220VDC 2 A
cable
*Twisted pair cable: 100m
*Multimode fiber: 1310nm, 2km (100Mbps); 1310nm, 500m (gigabit)
*Single mode fiber: 1310nm, 0-40km; 1550nm, 0-80km
source
*Input voltage: 110-220VDC/VAC, redundant input
*Connection terminal: 5.08mm spacing 5-pin Phoenix wiring terminal
*Power:<40W
mechanical properties
*Case: Aluminum model with fanless design
*Protection level: IP30
*Installation method: 19 inch 1U rack type
*Shell size: 440 mm * 44.5 mm * 370 mm (W * H * D), as shown in the attached image
*Impact, vibration, and drop: meet the requirements of IEC61850-3 5.5 CM level
*Weight: approximately 4.3kg

*10 Mbps forwarding speed: 14881pps
*100Mbps forwarding speed: 148810pps
*Transmission method: storage and forwarding
*System exchange bandwidth: 1.6Gbps
*Cache size: 1Mbits
*MAC address table: 2K