DSDI110A ABB I/O MODULE NEW ORIGINAL

ABB DSDI110A Full  Technical Specification
Basic Information
Brand: ABB
Model No.: DSDI110A
Order Code: 57160001-AAA
Product Name: S100 Series 32-channel Digital Input Module (DI Board)
Country of Origin: Sweden

HS Code: 8538909900
Dimension: 216mm(D) × 18mm(H) × 255mm(W)
Net Weight: 0.34kg
Input Parameters
1. Field Signal Input: Total 32 opto-isolated digital input channels, grouped into 4 sets × 8 channels; rated input voltage DC24V, compatible with industry standard passive dry contact & active 24VDC sourcing input signal.
2. Internal Power Input: Working power supplied by backplane rack bus DC24V, typical power consumption 5W.
3. Backplane Bus Input: Internal parallel control bus signal from rack base unit for configuration command & synchronous clock signal.
Output Parameters
1. Internal Bus Digital Output: Converted digital status data transmitted via rack backplane bus to system main controller for logic calculation, interlock protection and DCS upper monitoring display.
2. Status Indicator Output: On-board LED indicator output for power normal, channel fault and communication abnormal status display.
Working Environment
Operating temperature: -20℃ ~ +55℃; Storage temperature: -40℃ ~ +70℃; Humidity: 5%~95%RH non-condensing; Compliance with CE, UL certification standards.

interface
*Output method: rear output
*Fast Ethernet: 3 slots, each slot supports 8 ports, with optional optical and electrical options
*Gigabit Ethernet: Provides 4 1000Base SFP slots
*CONSOLE port: RS232 (RJ45)
*Alarm port: 5.08mm spacing 3-pin Phoenix wiring terminal, 250VAC/220VDC 2 A
cable
*Twisted pair cable: 100m
*Multimode fiber: 1310nm, 2km (100Mbps); 1310nm, 500m (gigabit)
*Single mode fiber: 1310nm, 0-40km; 1550nm, 0-80km
source
*Input voltage: 110-220VDC/VAC, redundant input
*Connection terminal: 5.08mm spacing 5-pin Phoenix wiring terminal
*Power:<40W
mechanical properties
*Case: Aluminum model with fanless design
*Protection level: IP30
*Installation method: 19 inch 1U rack type
*Shell size: 440 mm * 44.5 mm * 370 mm (W * H * D), as shown in the attached image
*Impact, vibration, and drop: meet the requirements of IEC61850-3 5.5 CM level
*Weight: approximately 4.3kg

*10 Mbps forwarding speed: 14881pps
*100Mbps forwarding speed: 148810pps
*Transmission method: storage and forwarding
*System exchange bandwidth: 1.6Gbps
*Cache size: 1Mbits
*MAC address table: 2K