500MBA01 1MRB150003R0002 1MRB200053/L ABB control panel new brand

Technical Parameters of ABB 500MBA01, 1MRB150003R0002, 1MRB200053/L

1. Brand Information

Brand: ABB

Product Series: Industrial Control Module Series (for industrial automation control systems)

2. Dimension Parameters

Length: 125 mm (millimeters)

Width: 90 mm (millimeters)

Height: 130 mm (millimeters)

Installation Depth: 105 mm (millimeters), including connector extension

3. Core Specifications

Product Models: 500MBA01, 1MRB150003R0002, 1MRB200053/L

Module Type: Digital I/O Control Module

I/O Channels: 16 digital input channels + 16 digital output channels (for 500MBA01); 8 digital input channels + 8 digital output channels (for 1MRB150003R0002, 1MRB200053/L)

Operating Voltage Level: Industrial standard 24V DC

Communication Protocol: Support Modbus RTU, Profibus-DP, Ethernet/IP (compatible with mainstream industrial communication protocols)

Response Time: Input response time ≤ 1ms; Output response time ≤ 2ms

Compatibility: Suitable for ABB AC500, AC800M and other series PLC controllers

Programming Software: Supported by ABB Control Builder Plus programming environment

4. Weight Parameters

Net Weight: 400 g (grams) for 500MBA01; 350 g (grams) for 1MRB150003R0002 and 1MRB200053/L

Gross Weight (including packaging): 550 g (grams) for 500MBA01; 500 g (grams) for 1MRB150003R0002 and 1MRB200053/L

5. Temperature Parameters

Operating Temperature Range: -25°C to +65°C (no condensation)

Storage Temperature Range: -40°C to +85°C

Operating Humidity Range: 5% to 95% relative humidity (no condensation)

Temperature Resistance Standard: Complies with IEC 60068-2-1 (low temperature) and IEC 60068-2-2 (high temperature) standards

6. Input Parameters

Power Input Type: DC (Direct Current) input

Rated Input Voltage: 24V DC (allowable fluctuation range: 18V DC to 30V DC)

Input Current: Typical operating current 0.4A; Maximum inrush current 0.8A

Digital Input Signal: Dry contact or voltage signal (0V DC for off, 24V DC for on) 

Input Impedance: ≥ 10 kΩ

Wiring Method: Screw terminal wiring, supporting shielded cable connection for anti-interference

interface
*Output method: rear output
*Fast Ethernet: 3 slots, each slot supports 8 ports, with optional optical and electrical options
*Gigabit Ethernet: Provides 4 1000Base SFP slots
*CONSOLE port: RS232 (RJ45)
*Alarm port: 5.08mm spacing 3-pin Phoenix wiring terminal, 250VAC/220VDC 2 A
cable
*Twisted pair cable: 100m
*Multimode fiber: 1310nm, 2km (100Mbps); 1310nm, 500m (gigabit)
*Single mode fiber: 1310nm, 0-40km; 1550nm, 0-80km
source
*Input voltage: 110-220VDC/VAC, redundant input
*Connection terminal: 5.08mm spacing 5-pin Phoenix wiring terminal
*Power:<40W
mechanical properties
*Case: Aluminum model with fanless design
*Protection level: IP30
*Installation method: 19 inch 1U rack type
*Shell size: 440 mm * 44.5 mm * 370 mm (W * H * D), as shown in the attached image
*Impact, vibration, and drop: meet the requirements of IEC61850-3 5.5 CM level
*Weight: approximately 4.3kg

*10 Mbps forwarding speed: 14881pps
*100Mbps forwarding speed: 148810pps
*Transmission method: storage and forwarding
*System exchange bandwidth: 1.6Gbps
*Cache size: 1Mbits
*MAC address table: 2K